How to Get Wrinkles Out of a New Rug
Unroll the rug, reverse-fold stubborn creases, and give it a few days on a flat floor. If a wrinkle remains, use gentle warmth only when the rug's care instructions allow it.
On this page (8 sections)
- How do you get wrinkles out of a rug quickly?
- Can sunlight or heat flatten a new rug?
- What should you do about curled rug corners?
- Can a rug pad help with wrinkles and bumps?
- Are rug grippers useful for a wrinkled rug?
- Why does a rug keep wrinkling after you flatten it?
- When should you stop trying to flatten a rug yourself?
- What's the best way to get wrinkles out of a rug?
To get wrinkles out of a rug, unroll it on a clean, flat floor, reverse-fold stubborn creases, and let it settle for several days. For a crease that stays put, use a broad, light weight or gentle warmth only if the rug's care instructions allow it.
Folded shipping can leave ridges in a new rug, and a rug rolled tightly for storage may have curled ends. Most flattening starts with time and an even surface, so avoid sharp folds, direct high heat, or pulling hard on the corners.
How do you get wrinkles out of a rug quickly?
Reverse-fold the crease gently, then lay the rug flat with the fold facing the opposite way. This can help relax a shipping crease without adding heat.
Start by clearing the floor and unrolling the rug fully. Smooth it from the center toward the edges with your hands, rather than tugging at one corner.
If a wrinkle returns, roll the affected section loosely in the opposite direction for a short time, then unroll it again. Don't make a tight crease or force a fold against a thick or stiff backing.
A new rug may need a few days under normal room conditions to settle. Check it each day and move any weight you used so it doesn't leave a mark.
Does putting weight on a rug crease help?
A broad, light weight can hold a crease flat while it relaxes. Use a clean, flat object or a cushion, and spread the weight across the fold.
Avoid a small, heavy item that concentrates pressure on one spot. Check beneath it regularly, especially if the rug has a soft pile or a backing that might hold an imprint.
Can sunlight or heat flatten a new rug?
Room-temperature air and time are the safest starting points. Direct sunlight, a hot iron, or a heat gun can damage fibers or backing, so check the rug's care instructions before applying warmth.
If the instructions allow a steamer or low heat, keep the tool moving and test a hidden spot first. Don't soak the rug or press a hot iron directly onto it.
For folded shipping creases, the RELEANY 8x10 Washable Area Rug notes that creases may fade within days under regular use, and suggests reverse-folding or placing a heavy item on the creased area to speed flattening.

Its care notes address folded shipping creases and suggest reverse-folding or weighting them while the rug settles.
See it on AmazonThis low-pile rug has a non-slip backing and supports machine washing. Check the care instructions before using heat, and let the rug dry fully if it gets damp.
What should you do about curled rug corners?
Reverse-roll a curled corner, then give it time to rest flat. If the edge keeps lifting, check that the rug lies evenly and isn't caught beneath furniture.
A rug that curls repeatedly may need help staying in place after it flattens. See how to stop a rug from curling at the corners for ways to address lifted edges.
For a hard floor, a compatible pad or gripper can help reduce movement that causes corners to shift. Check the rug backing and floor type before choosing one.
Can a rug pad help with wrinkles and bumps?
A rug pad can help limit shifting and bunching on a compatible hard floor. It won't remove a deep shipping crease by itself, so flatten the rug first and fit the pad beneath it.
The Gorilla Grip 8x10 Slip-Resistant Rug Pad has a dual-sided grip intended to hold the pad and rug in place on hard floors. It measures 8 by 10 ft and can be trimmed to fit.

Its dual-sided grip is designed to reduce rug movement and bunching on hard floors.
See it on AmazonMake sure the pad suits both your floor and rug dimensions, and follow its placement instructions. If the rug is over carpet, see how to keep a rug from sliding on carpet for options that fit that surface.
Are rug grippers useful for a wrinkled rug?
Grippers may help keep edges steady after you flatten the rug. They're meant to secure corners and edges, not to smooth folds trapped in the middle.
Rabenda Rug Tape Grippers (12 Pack) use a thin triangle shape and are made for several hard floor types. The brand advises against using them on rugs with fluffy, jute, or rubber backing, and on rugs placed over carpet.

Triangle grippers can hold rug corners and edges in place on compatible hard floors.
See it on AmazonCheck the rug backing before applying any gripper, and try a small piece first if you're unsure whether it will work. Compare the differences in rug pad vs rug gripper before choosing.
Why does a rug keep wrinkling after you flatten it?
A rug may wrinkle again if it shifts, sits on an uneven floor, or is held down unevenly. Move furniture off the problem area and check that the rug can lie flat from edge to edge.
Smooth the rug from the center outward and look for a trapped cable, floor mat, or furniture foot underneath. If the backing slides on a hard surface, a compatible pad or gripper may help keep the rug steady.
On carpet, a hard-floor gripper may not be suitable. Match the solution to the floor and rug backing rather than layering products that can make the surface uneven.
When should you stop trying to flatten a rug yourself?
Stop if the rug's fibers or backing show damage, or if flattening requires force or heat the care instructions don't allow. Check the care label or contact the rug's maker for material-specific guidance.
If the rug remains wavy after several days on a flat floor, inspect its shape and backing. A persistent ripple can come from a manufacturing issue or a poor fit in the room, so avoid stretching it by pulling on the edges.
What's the best way to get wrinkles out of a rug?
For a new rug, unroll it, reverse-fold stubborn creases, and give it several days to settle. Use a broad weight only when needed, and check care instructions before trying heat.
If the rug lies flat but keeps shifting, choose a pad or gripper that suits its backing and floor. For a washable option, read what to know before you buy machine washable area rugs.
Frequently asked questions
How long does it take for a new rug to flatten?
Many shipping creases relax over several days when a rug lies flat under normal use. The time depends on the rug material, how it was packed, and how deep the folds are.
Reverse-fold a stubborn crease gently or place a broad, light weight over it, then check the rug each day.
Can I use an iron to get wrinkles out of a rug?
Don't put an iron directly on a rug unless its care instructions clearly allow it. Heat can damage or flatten fibers and may harm the backing.
Try unrolling, reverse-folding, and waiting first; use a steamer or low heat only if the rug's maker permits it and you can test a hidden area.
Why does my rug still have bumps after flattening?
A rug can keep rippling if it is too large for the space, trapped under furniture, resting on an uneven floor, or sliding on a smooth surface. Clear the rug, lay it flat, and check the floor and edges.
If the back moves, choose a compatible pad or gripper for the floor and rug backing.
Should I put heavy furniture on a rug wrinkle?
A broad, stable item can help hold a crease flat while it relaxes, but avoid sharp feet or a small heavy object that could leave a dent. Spread the weight over the wrinkle and check underneath regularly.
Don't drag furniture across the rug, since that can stretch or bunch it.
About this guide: Our look at flattening wrinkles in a new rug draws on maker specs, materials and what owners report. See how we research.



